How to Set Up a Destoner Cum Grader Aspirator for Different Grains and Pulses
A Destoner Cum Grader Aspirator combines three cleaning jobs in one machine. It removes stones, grades grain by size, and pulls out dust and light impurities with air. But the machine only performs well when it is set up for the product you are running. Wheat, rice, lentils, and chickpeas all behave differently. This guide explains the main settings and how to adjust them.
The Four Settings That Matter Most
Most machines have four key adjustments. Each one affects cleaning quality and output.
1. Deck Angle
The deck angle controls how fast material moves across the destoning surface. A steeper angle moves product faster but may let small stones pass through. A flatter angle gives better separation but lowers output.
2. Airflow
Air lifts the lighter grain while heavier stones stay on the deck and move the other way. Too much air blows good grain out with the dust. Too little air lets the grain sit on the deck, and stones stay mixed in.
3. Vibration
Vibration helps material spread evenly and move in the right direction. Heavy pulses need stronger vibration. Light grains need gentler movement.
4. Screen Size
The grading screens separate product by size. Choose screens based on the grain size you want to keep and the broken or undersized pieces you want to remove.
Setting Up for Common Products
Wheat
Wheat flows well and has a steady size. Use moderate airflow and a medium deck angle. Watch closely for small stones of similar size to the grain.
Rice
Rice is lighter and breaks easily. Use lower airflow and gentle vibration to avoid blowing out good grains or adding broken pieces.
Lentils and Small Pulses
Lentils are flat and can slide rather than float. Increase airflow slightly and use a flatter deck angle so stones have time to separate.
Chickpeas and Large Pulses
These are heavy and round. They need stronger airflow and higher vibration. Use larger screens to grade out splits and small pieces.
Simple Tips for Better Results
Feed the machine evenly. Uneven feeding causes poor separation.
Run a small test batch after every product change.
Check the stone outlet. If good grain is coming out, reduce airflow or adjust the angle.
Clean the deck and screens often to stop clogging.
Keep a written record of the best settings for each product.
Signs Your Settings Need Adjusting
Even a well-set machine can drift as raw material changes. Watch for these signs:
Stones appearing in the cleaned output
Too much good grain leaving with the stones or dust
Material piling up on one side of the deck
Lower output than usual at the same feed rate
When you notice any of these, adjust one setting at a time and test again.
Conclusion
Setting up the machine correctly makes a real difference to product quality, yield, and customer trust. Small changes in airflow, deck angle, and vibration can turn average cleaning into excellent cleaning. With the right settings for each grain or pulse, a Destoner Cum Grader Aspirator becomes one of the most valuable machines in any processing plant. Al Jarah Industries supplies these machines across the UAE and helps customers with setup, product trials, and operator guidance.

Comments
Post a Comment